• 肥西:居民楼前路面塌出大坑 面积数十平米 2018-12-19
  • 十三届全国人大一次会议在京闭幕 习近平发表重要讲话 2018-12-19
  •  

     
    EMC, Power Quality and Protection
    TOSHIBA
    The following devices are specifically designed to provide protection, reduce EMI and improve the power quality (ie. power factor, harmonic distortion, surge suppression) of Toshiba TOSVERT inverter drives. Please feel free to contact us for more information. We are also able to perform power quality measurements and analysis on-site to help you select the optimal solution that complies with power quality standards or requirements
     
    Benefits of Reactors and Filters
     
    • Increase Drive System Reliability
    • Reduce Harmonics
    • Reduce dv/dt (EMC)
    • Reduce Motor Noise and Temperature
    • Improve True Power Factor
    • Filter Power Line Disturbances
    • Reduce Surge Currents
    • Extend Transistor Life
    • Reduce Voltage Doubling Effects
    • Absorb Power Line Spikes
     
    Comparison of DC reactor and AC reactor
    Reactor Efficiency
    Power factor improvement Harmonics reduction External surge voltage reduction
    Ac reactor o o o
    DC reactor oo oo x
     

    AC Reactor
    The AC reactor is used to improve the input power factor of the inverter power supply, reduce harmonics and/or suppress external surges. Joint usage of the DC reactor with the AC reactor will provide high reliability operation of TOSVERT inverter for suppressing external surges.
    For: All Tosvert series
     

    DC Reactor
    The DC reactor is used to improve the input power factor of the inverter power supply and reduce harmonics. The DC reactor is more effective than the AC reactor in improving the power factor and reduce harmonics.

    For: All Tosvert series (some models have built-in DC reactor)
     

    EMI Filter
    Most TOSVERT series inverter drives have built-in EMC noise filter. But when you need to comply with a higher standard or connected to long motor cable between inverter drive and motor, please use an external EMI filter.

    For: All Tosvert series
     

    Braking Resistor
    Frequent start-stop operation, sudden braking or when the deceleration time must be shortened on loads with large inertia will generate and dissipate excessive heat energy. The braking resistor is used to absorb the energy.

    For: All Tosvert series
     

    Active Front-End Hamonic Filter
    The SC7 can greatly reduce harmonics on the power side and assure the operations at high power factor.

    For: All Tosvert series
     


     
    Communications
     

    TOSHIBA
    With one of the broadest sets of supported industrial protocols in the industry, Toshiba drives can easily communicate with your network. With little or no setup required, genuine Toshiba option cards offer an almost plug and play installation and seamlessly integrate into your network.
    The built-in communication options provides the interface between industrial networks and inverter drives. The communication modular terminal blocks are ideal for space saving and centralized control systems.

     

    DEV001Z: DeviceNet Communication Option Board
    Built-in DeviceNet interface for VF-S11 inverter

    For: Tosvert VF-S11, VF-FS1 
     

    RS4003Z: RS485 Communication Option Board
    Built-in RS485 interface for VF-S11 inverter

    For: Tosvert VF-S11, VF-FS1 
     

    LIU005Z: LonWorks Communication Option Board
    Built-in LonWorks interface for VF-S11 inverter

    For: Tosvert VF-S11, VF-FS1
     

    Communication Terminal Block Expansion Option
     - DEV002Z: Built in DeviceNet card for VF-AS1/PS1
     - PDP002Z: Built in Profibus DP card for VF-AS1/PS1
     - CCL001Z: Built in CC-Link card for VF-AS1/PS1
    For: Tosvert VF-AS1, VF-PS1
     

    I/O Terminal Block Expansion Option
     - ETB003Z: 4 digital inputs, 2 digital outputs, 1 relay output, 1 PTC input
     - ETB004Z: all ETB003Z I/O's + 2 analogue inputs & 2 analogue outputs
    For: Tosvert VF-AS1, VF-PS1
     

    No Picture
    Available

    TOS-SN-2: RS485 Communication Interface
    External RS-485 Interface
    For: Tosvert VF-S11, VF-FS1, VF-nC1, VF-A7, VF-P7
     

    Network Options
    RS485 (Modbus®RTU/TOSHIBA), PROFINET®, DeviceNetTM, PROFIBUS®-DP, EtherCAT®, CANopen®,CC-Link®, LONWORKS®, BACnet®, Metasys®N2, APOGEE®FLN
    For: Tosvert VF-AS3, VF-S15
     

     

    最近足球赛事

    Industrial Control Communications
    Specializing in the engineering and manufacturing of embedded communication and control solutions for factory automation, networked controls, and building automation systems. The ICC Network Gateway Series is designed for Toshiba inverter drives to provide a uniform interface, configuration and application experience. This commonality reduces the user's learning curve, reducing commissioning time while simplifying support
    .
     

    PBDP-110: External Profibus Interface
    Provides Profibus connectivity to Toshiba inverter drives.
    For: Tosvert VF-S11, VF-FS1, VF-nC1, VF-A7, VF-P7
     

    MBP-100: Modbus Plus Network Gateway
    Provides connectivity between Modbus Plus, RS-485 and RS-232 based fieldbus protocols and/or Toshiba inverter drives.
    For: Tosvert VF-S11, VF-FS1, VF-nC1, VF-A7, VF-P7
     

    DNET-100: DeviceNet Network Gateway
    Provides connectivity between DeviceNet, RS-485 and RS-232 based fieldbus protocols and/or Toshiba inverter drives.
    For: Tosvert VF-S11, VF-FS1, VF-nC1, VF-A7, VF-P7
     

    ETH-200: Ethernet Multi-Protocol Network Gateway
    Provides connectivity between Ethernet, RS-485 and RS-232 based fieldbus protocols and/or Toshiba inverter drives.
    For: Tosvert VF-S11, VF-FS1, VF-nC1, VF-A7, VF-P7
     



     
    Remote Keypads & HMI Interfaces
    Toshiba allows you to mount your inverter drive somewhere else while keeping the control close to you. With plain English displays and the ability to store drive parameter sets available on some units, these keypads can make it even easier when using your new Toshiba inverter.
     
    TOS-SN-1: Extension control panel
    Display 4 digit LED. Inverter's built-in panel functions.
    For: Tosvert VF-S11, VF-FS1, VF-nC1, VF-A7, VF-P7
     
    TOS-SN-10: Extension control panel
    Display 4 digit LED. Inverter's built-in panel functions.
    For: Tosvert VF-AS1, VF-PS1, VF-nC3, VF-S15
     

    RKP001Z: Toshiba Remote control keypad  
    Display 4 digit LED. Inverter's built-in panel functions.
    For: Tosvert VF-S11, VF-FS1, VF-nC1
     

    RKP002Z: Toshiba Remote control panel
    Display 4 digit LED. Parameter copy & memory function. Easy Key
    For: Tosvert VF-AS1, VF-PS1, VF-S11, VF-FS1, VF-nC1
     

    RKP004Z: Toshiba Remote High Resolution LCD panel
    LCD Display w/backlight. Language selection. Jog dial + 4 function keys.
    For: Tosvert VF-AS1, VF-PS1
     


    PC-Link Cables
    Connect your Toshiba inverter drive with any PC/notebook using one of the following cable options to configure, operate and monitor the inverter drive with the easy-to-use PCM software. (Note: PCM software is included and available for download)
     

    TOS-SN-3: RS232/USB PC-Link cable
    Data communication between PC's RS232c serial or USB port with inverter drive.
    For: Tosvert VF-S11, VF-FS1, VF-nC1
     

    TOS-SN-9: USB PC-Link cable
    Data communication between PC's USB port with inverter drive.
    For: Tosvert VF-AS1, VF-PS1, VF-nC3, VF-S15
     

    USB001Z: USB PC-Link cable
    Data communication between PC's USB port with inverter drive.
    For: Tosvert VF-S15, VF-AS1, VF-PS1, VF-S11, VF-FS1, VF-AS1, VF-nC1
     

    Multi-loader : mobile parameter writer
    Multi loader integrates parameter writer that can transfer configuration files to VFD. With multi loader you can set the parameter without connecting VFD to power source.
    For: Tosvert VF-S15, VF-AS1, VF-PS1, VF-S11, VF-FS1, VF-AS1, VF-nC1
     



    © 2017 Sunnice Supplies Co., Ltd all rights reserved.

  • 肥西:居民楼前路面塌出大坑 面积数十平米 2018-12-19
  • 十三届全国人大一次会议在京闭幕 习近平发表重要讲话 2018-12-19